Skip to content

How To Overclock A Laptop? Find Out Here!

  • Aryan 
  • 12 min read

How To Overclock A Laptop?

Overclocking a laptop isn’t difficult, but it does require a bit of technical knowledge.  The Intel and AMD overclocking software work only with their higher-end multi-processor CPUs.

However, there are third-party overclocking programs available that can be used with most laptops. These programs are usually free, although some come at a cost.

Regardless of which method you decide to use, remember that overclocking your laptop voids its warranty and can permanently damage the device.

There are three main methods to overclock a computer: tweaking the BIOS settings, using generic overclocking software to change the CPU voltage and timing, or using Intel and AMD programs designed for that purpose.

Be careful not to brick your laptop!

Can My Laptop Be Overclocked?

Most laptop CPUs are locked so that they cannot be overclocked. However, there are exceptions. Some laptops come with unlocked CPUs that can be overclocked. You’ll find out whether yours is one of those models after you open it up.

You should only attempt to overclock a laptop if you know what you’re getting yourself into. There are risks involved, including overheating and damaging the motherboard. So unless you’ve done extensive research and testing, it’s probably best to leave your laptop CPU alone.

Overclocking A Laptop With A Turbo Button

You’ll find the turbo button on most laptops. You can use it to overclock your computer. Overclocking means increasing the speed at which your processor runs. This increases performance and allows you to run programs faster.

To overclock your laptop, you’ll need to find the turbo button on your laptop. Most laptops have a turbo button located somewhere near the keyboard or in the Function Key Row. Some laptops may call it a Boost or Turbo button instead.

Once you’ve found the turbo button, press it once to activate it. Then wait until Windows boots. Once Windows starts, close any open windows. Now, start typing in the search bar. Type in overclocking and hit enter.

A list of results should pop up.

  • Scroll down through the list until you find the option to change the CPU multiplier.
  • Change the multiplier to 1.5. Press OK to save changes.
  • Now, restart your computer.
  • Open Task Manager and click on the Performance tab.
  • Click on Processor.
  • Look under the Processes section and look for the process named Intel(R) Core(TM) i7-6700HQ.
  • Right-click on it and select End task.

Repeat steps 3 – 5 for every core on your system. After you’ve done this, reboot your computer.

Your computer should now be running at a higher clock rate than normal.

Is It Possible To Overclock My Laptop Using The Bios?

Overclocking a laptop using the BIOS isn’t really possible anymore. Most laptops today come preinstalled with locked bios chipsets. These chipsets prevent the user from overclocking the CPU. However, there are still a handful of laptops out there that do support overclocking through the BIOS.

These high-end CPUs include the AMD Ryzen 5950hx and Intel Core i9 12900HK. Both of these CPUs are designed to be overclocked with first-party software. You’ll find that the performance gains are significant, especially if you plan on gaming at 1080p resolution.

However, keep in mind that only a small number of laptops are capable of being overclocked. So, if you’re planning on buying a new laptop, make sure that it supports overclocking through the BIOS chip.

Is Overclocking A Laptop Safe?

Overclocking a laptop isn’t safe. You run the risk of causing irreversible damage to your computer if you set a value that is out of range. However, there are steps you can take to minimize the risks associated with overclocking.

First, monitor your laptop temperature closely. If it starts getting hot, stop using the overclock right away. Don’t continue to use an overclock if your laptop is overheating!

Second, only change values slowly and regularly. Small changes are safer than big ones.

Third, keep track of any problems you encounter. Write down the exact settings you used and the results you achieved. Then, compare those results against the manufacturer’s recommended settings. If you find that your results differ significantly from the manufacturer’s recommendations, adjust your settings accordingly.

Finally, never exceed the limits of your motherboard. Doing so can cause irreparable damage to your computer.

What Exactly Is CPU Overclocking?

CPU overclocking is the process of increasing the clock rate of a computer’s central processing unit (CPU), usually done through software rather than hardware modifications. You can find out if your CPU supports overclocking by checking its specifications online.

You’ll need to install special software to enable overclocking. Once enabled, you can adjust the clock rate of your CPU using a slider bar. Some CPUs support multiple clock rates, allowing you to select between two speeds.

Once you’ve increased the clock rate, you may notice a slight decrease in overall system performance. However, most users report no noticeable difference in performance after overclocking.

Overclocking is not recommended unless you have experience doing it. There are risks involved, including overheating and damage to components. Also, overclocked processors tend to run hotter than stock ones, making them less reliable.

There are several benefits to overclocking, including improved performance and extended battery life. Overclocking can also reduce power consumption, which helps save energy and prolongs the lifespan of your device.

What Exactly Does Overclocking Do?
Is It Safe To Overclock?

Overclocking is not safe. You may damage your motherboard if you try to overclock without following proper procedures. Also, overclocking can cause overheating and burnout of components.

However, there are times when overclocking is necessary. For instance, if you are using a high-performance graphics card, you might want to boost its performance. Or, if you are running a game that requires a lot of processing power, you might want to increase the speed of your CPU.

You should only attempt overclocking if you know what you are doing. Always keep safety in mind and never exceed recommended settings.

What Is The Use Of Overclocking My CPU?

There are several reasons why you might want to overclock your CPU. One reason is if you’re using a high-performance graphics card. You may notice that your computer feels sluggish when playing games or watching movies. By overclocking your CPU, you’ll give yourself extra horsepower to handle those intensive tasks without slowing down.

Another reason to overclock your CPU is if you’re doing heavy multitasking. Multitasking means running multiple programs simultaneously. For instance, you might be working on a spreadsheet while listening to music through headphones. If you’re not careful, you can easily lose track of what you’re doing. By overclocking your processor, you’ll give yourself additional resources to keep track of what you’re working on.

You can also overclock your CPU if you’re trying to squeeze every last bit of performance out of your system. If you’ve upgraded your hard drive recently, you may find that your computer runs slower than expected. By overclocking your computer, you’ll boost its processing power and let it perform at peak efficiency.

Is It Worth It To Overclock Your Computer?

You can overclock your computer to run faster applications and a performance boost. However, there are certain limitations to consider. For instance, you won’t notice any difference in performance unless you’ve upgraded your processor. Also, overclocking isn’t recommended for laptops, since overheating is a common problem.

Another reason why you might want to overclock your computer is to reduce power consumption, prevent permanent damage, and conserve energy. By reducing the voltage applied to your CPU, you can lower its operating temperature. As a result, you can extend the life of your motherboard and other components.

However, if you do notice a significant boost in performance, then you should definitely give overclocking a shot.

Should I Overclock My CPU To Play Games?

There are two main reasons why you might want to overclock your computer processor performance. First, you might want to play games at a higher resolution. Second, you might want to run programs faster at their maximum performance.

You can overclock your computer to achieve either of those goals. However, there are drawbacks to overclocking. For instance, overclocked computers tend to heat up more quickly and generate more noise. Also, overclocking can cause problems with overheating and damage to your motherboard.

So, should you overclock your computer? Well, it depends on whether you want to play games at high resolution or make the gaming performance faster. If you want to play games, then overclocking isn’t necessary. But if you want to run programs faster, then overclocking is definitely worthwhile.

How To Overclock Your CPU Safely For PCs And Laptops?

Overclocking your CPU isn’t difficult, but there are certain precautions you should take to prevent overheating and damage to your hardware. You’ll need to monitor your computer’s temperature and make sure it stays below 80 degrees Celsius. Also, you’ll need to make sure your motherboard supports overclocking and check your current CPU performance. Finally, you’ll need to install specialized software to optimize your CPU.

There are two methods available: manually and automatically. Both require you to adjust your BIOS settings. However, automatic overclocking requires special software, whereas manual overclocking allows you to control every aspect of your CPU’s speed.

Finally, you’ll need to optimize your CPU using dedicated software. Optimization software helps you tweak your CPU’s clock speeds and voltages to maximize performance. Once you’ve installed the software, you’ll be able to fine-tune your CPU’s speed and voltage levels.

Once you’ve completed these steps, you’ll be well on your way to achieving a stable overclock. Now, let’s move on to the next steps!”

Step 1: Determine The Core Temperature Of Your CPU

There are two methods you can use to find the core temperature of your processor. One method involves using a thermal sensor, which measures the temperature directly. Another method uses software to estimate the temperature.

You can find the core temperature of a CPU in BIOS or with a 3rd party application. Before starting, you should check the temperature of your CPU to make sure it isn’t overheating. Overclocking will increase the temperature, so you’ll want to measure any changes.

Step 2: Run A System Stress Test

A laptop stress test is used to determine whether your computer is stable under the current clock speed. If you find out that it isn’t, you’ll want to figure out why.

You can use a program called Prime95 to stress test a CPU. It constantly runs a 100% load on all of your processor cores, simulating heavy workloads. Let it run for 1 or 2 hours and keep an eye on temperatures during the process.

Use a program like Prime95 for stress testing your CPU before overclocking.

Step 3: Examine The Performance Of Your CPU

Before you begin overclocking, make sure you’ve optimized your system. Optimizing your system means cleaning out any unnecessary programs and making sure your hardware is working properly. Once you’ve done that, you can start overclocking.

Avast Cleanup will automatically remove resource-consuming apps to make sure your system runs smoothly. That way, when it comes time to overclock, you won’t have to worry about anything slowing down your computer or any hardware damage.

Step 4: Access Your BIOS

To access your BIOS, you need to power down your computer and restart it. Once it starts, press the DELETE, F2, or the F10 key repeatedly until you reach the BIOS screen. You may need to hold down the keys for several seconds.

Your BIOS likely looks different from those in these screenshots, but if you see any text similar to, Advanced CPU Core Settings, OC/Overclocking, or Overclocked, then you’ve reached the right place. This is where you can adjust your CPU speed.

Step 5: Select Between Automatic And Manual Overclocking

Select Between Automatic And Manual Overclock

You’ll probably want to select between automatic and manual overclocking if you haven’t already done so. You should definitely go with automatic overclocking unless you really know what you’re doing. Otherwise, you might end up damaging your computer.

That said, there are times when you might want to manually adjust the CPU speed. For instance, if you’re using a high-performance processor, you might want to manually increase its clock speed to achieve faster performance. However, you shouldn’t expect any significant performance gains from overclocking.

Overclocking isn’t recommended for most users. Instead, it’s generally used by enthusiasts who want to squeeze every last drop of performance out of their computers.

Step 6: Adjust Your CPU Multiplier

This is where most people run into problems. Most people think that if they increase the processor multiplier, they’ll get faster speeds. However, that isn’t necessarily true. Increasing the processor multiplier doesn’t automatically mean that your computer will perform any better. Instead, it means that your computer will work harder to achieve those same speeds.

What Happens If I Overclock And Get A Black Screen?

Overclocking is great if you want to speed up your computer. However, sometimes it doesn’t work out quite right. You might end up with a black screen instead of a working computer. Fortunately, there are several solutions to fix this problem.

First, you should reset your BIOS. Resetting the BIOS resets all overclocked settings to their default values. So if you’ve already tried overclocking and it didn’t work, resetting the BIOS may solve the issue.

Second, you can remove the little battery on your motherboard. Wait ten seconds and replace it. This solution works only if you haven’t changed any settings since you overclocked.

Finally, you can pull out your motherboard’s battery and wait ten seconds. Then put it back in. This solution works only in the event that you’ve changed any settings since you overclock.

You’ll find detailed instructions from the processor manufacturers in your motherboard’s manual.

Aryan Benedict

Aryan Benedict

I'm Aryan, welcome to my profile and website My aim is to answer all your tech and gadget related questions in one, easy-to-navigate, website. I love technology and a lot of my interest lies in gadgets of today. There are many common questions I am constantly asked about various products - hence the birth of Tech Loved. My awesome team and I will answer all the questions you may have (well maybe not all, but hey, we try! :) )

Leave a Reply

Your email address will not be published. Required fields are marked *